INSPECTION SOFTWARE
FROM FIELD INSPECTION TO ACTIONABLE ASSET INTELLIGENCE
Aurion’s inspection software brings drone and field-inspection results into one organized workflow—helping asset owners and O&M teams visualize defects, prioritize findings, document corrective work and maintain a clearer asset history.
INSPECTION DATA WITH A PURPOSE
ONE INSPECTION RECORD
A CLEARER PATH TO ACTION
Renewable-energy inspections can produce large volumes of images, measurements, observations and supporting documents. When that information is spread across folders, spreadsheets and disconnected reports, important findings are harder to prioritize and follow through.
​
Aurion’s inspection software structures inspection evidence around the relevant site, asset and issue. It creates a traceable connection between what was inspected, what was found, what action was recommended and what work was completed.
01
CAPTURE & ORGANIZE INSPECTION DATA
Bring inspection information into a consistent, asset-based record for easier review and future reference.
​
Capabilities:
- Drone-based infrared thermal inspection results
- Electroluminescence inspection results, where included in scope
- Visual imagery and field observations
- Glass, module and structural findings
- GPS-tagged site, array, module, equipment or component references where supported
- Inspection dates, methods and supporting documentation
- Repeat-inspection records
- Module-level digital records where configured
02
VISUALIZE & CLASSIFY DEFECTS
Turn inspection findings into structured issues that technical and operating teams can understand and prioritize.
​
Capabilities:
- Defect imagery and supporting evidence
- Finding type and affected asset
- Severity or priority classification
- Thermal anomalies and hotspots
- AI-assisted defect classification for approved inspection workflows
- Cracks, micro-cracks and structural observations where detectable by the selected method
- Degradation indicators identified through the applicable inspection process
- Technical notes and recommended next steps
.jpg)
03
PRIORITIZE FINDINGS & CORRECTIVE ACTIONS
Help teams move from inspection results to a practical response plan.
​
Capabilities:
- Prioritized finding lists
- Recommended inspection follow-up
- Corrective-action status
- Assignment or ownership information where configured
- Maintenance and repair records
- Supporting photographs and completion notes
- Open, in-progress and resolved issue visibility
04
TECHNICAL REPORTING & DOCUMENTATION
Create a clearer record for technical review, maintenance planning, project closeout and stakeholder communication.
​
Capabilities:
- Inspection summaries
- Finding-level technical detail
- Asset and portfolio reports
- Corrective-action documentation
- Before-and-after verification records
- Warranty-supporting evidence where applicable
- Custom PDF or spreadsheet outputs where supported
- QA/QC, handover or claim-support reporting according to scope
05
BUILD ASSET HISTORY & PORTFOLIO INTELLIGENCE
Repeated inspections become more useful when findings and completed actions can be reviewed over time.
​
Capabilities:
- Inspection history by site or asset
- Recurring and unresolved issue visibility
- Comparison between inspection cycles
- Cross-site or portfolio summaries
- Multi-site portfolio management where configured
- Evidence for maintenance and replacement planning
- Warranty and lifecycle decision support
- Verification after corrective work
- API connection to approved SCADA or CMMS environments where supported
DESIGNED TO SUPPORT MULTIPLE INSPECTION WORKFLOWS
The software and service should present only the inspection methods included in Aurion’s approved scope and available for the relevant asset, site conditions and project stage.
INFRARED THERMAL INSPECTION
Use daytime thermal and RGB capture to document applicable hotspots, bypass-diode issues, substring/module/string failures, shading or soiling patterns, visible damage and thermal anomalies associated with connectors or junction boxes.
ELECTROLUMINESCENCE INSPECTION
Use the applicable EL process to document cell-level micro-cracks, dark cells, broken grids, soldering defects, bypass-diode failures and indicators associated with PID or UVID that may be invisible to conventional thermal inspection.
VISUAL & STRUCTURAL REVIEW
Record visible module, glass, mounting, wiring, connector, junction-box or structural observations identified during drone or field inspection.
FIELD TESTING & DIAGNOSTICS
Connect approved field observations, measurements and technical documentation—including IV or flash-test correlation where included—with the affected asset or issue.
Connected inspection workflow
Inspection software creates the most value when it supports a complete operational workflow. Aurion can connect inspection information with technical review, O&M planning, corrective work and verification according to the project scope.
.jpg)
FULL-LIFECYCLE QUALITY CONTROL
VERIFY ASSET CONDITION AT EVERY CRITICAL HANDOVER
Inspection records are most valuable when they begin before operation and continue through the life of the asset. Aurion can structure an inspection and documentation program around the project’s quality, acceptance, operating, warranty and insurance requirements.
01
PRE-SHIPMENT FACTORY VERIFICATION
Use approved visual, EL, IV or flash-test review to identify applicable manufacturing defects and establish evidence before modules leave the supply chain.
02
PORT-ARRIVAL INSPECTION
Document visible or detectable shipping and handling damage before equipment is formally accepted or transported onward.
03
SITE-DELIVERY VALIDATION
Create an inspection record at delivery or during installation to distinguish transport, handling, racking or installation-related damage.
04
PRE-COD & POST-COMMISSIONING BASELINE
Establish an as-built IR, EL and/or visual inspection baseline for project acceptance, handover, lender, insurer, manufacturer and future O&M comparison.
05
YEAR-ONE & RECURRING O&M
Conduct scheduled inspection to track defect progression, compare inspection cycles, prioritize maintenance and support warranty action before relevant deadlines.
06
TARGETED DIAGNOSTICS
Investigate an operating issue, suspected defect or performance concern using the inspection method appropriate to the suspected failure mode.
07
POST-EVENT & INSURANCE DOCUMENTATION
Document hail, storm, mechanical or other event-related damage using traceable inspection evidence that may support technical assessment and insurance discussions.
08
POST-MAINTENANCE VERIFICATION
Record completed corrective work and conduct follow-up inspection where required to confirm whether the identified issue has been addressed.
FROM EVIDENCE TO RESOLUTION
INSPECTION DATA THAT SUPPORTS TECHNICAL AND COMMERCIAL ACTION
Inspection findings may need to support more than maintenance. Aurion can help organize the technical evidence required for quality review, project handover, warranty discussions, insurance documentation and longer-term asset planning, subject to the agreed scope.
​
Capabilities:
- Independent technical review
- Design and installation validation support
- QA/QC and handover documentation
- Manufacturer-claim evidence preparation
- EL, IR and visual defect documentation
- Factory or supplier coordination where included
- Investor and lender technical-review support
- Testing and documentation support
- Performance and maintenance recommendations
Claims-support workflow
01
Inspect
Document and quantify relevant findings using the approved inspection methods.
02
Organize
Prepare traceable module- or asset-level evidence and technical analysis.
03
Engage
Support communication with the appropriate EPC, manufacturer, supplier, insurer or project stakeholder.
04
Resolve
Track the agreed repair, replacement, further testing or other corrective response.
BUILT FOR TEAMS RESPONSIBLE FOR ASSET QUALITY AND PERFORMANCE
Commercial and industrial solar-asset owners
Utility-scale and portfolio asset managers
O&M and field-service teams
EPC, commissioning and quality teams
Project developers and investors
Lenders, insurers and technical advisors
Facility and property managers
Builders and residential developers managing multi-site programs